暂无介绍
苔藓是苔藓门下的一种原始植物。它的近亲是苔类和角苔。苔藓生长在潮湿或阴凉的地方密集的绿色丛或垫。它们有简单的叶子附着在茎上,可以是分枝的,也可以不是分枝的。纤细的毛发状的根瘤将植物附着在基质上。大多数苔藓是非维管植物,但有些可能发育出原始的维管系统。它们直接从体表吸收水分。苔藓是光合植物,只有在有水的情况下才能生长。当没有水时,它们会停止新陈代谢。苔藓是重要的,因为它们从水生生境到陆地的适应强调了...
种子中储存食物的组织称为胚乳。胚乳储存种子萌发过程中胚发育所需的营养物质。胚乳中的营养物质可以作为食物被人和动物摄取。被子植物双受精过程中初生胚乳核三次融合形成。单子叶植物种子中有一个突出的胚乳。它主要由淀粉组成。因此,胚乳是种子的可食部分。有些种子的胚乳中含有油脂。胚乳中的糖可以用来生产啤酒。...
授粉是植物有性生殖过程中,将花粉粒从一朵花的花药转移到同一朵花或不同朵花的柱头上的过程。它通过让花粉粒在柱头上萌发来启动受精过程。花药属于花的雄性部分,产生花粉粒。柱头属于花的雌性部分,在授粉过程中接受花粉粒。花药和柱头都是为了提高其在花中的功能而进行的适应。因此,柱头本身具有促进授粉的适应性。本文将介绍这些调整。...
黄酮类化合物是由15个碳原子组成的植物色素,由两个碳原子组成,并与三个短碳链相连的苯环组成。花青素和花青素是两种红蓝色植物黄酮类化合物,主要存在于高等植物的花和果实中。花青素与花青素的主要区别在于花青素是水溶性液泡色素,而花青素是花青素的无糖对应物。花青素和花青素的颜色取决于pH值。两种色素都用作药物成分,提供有益的健康效果。它们也被用作天然食品着色剂。...
果实和种子负责植物的繁殖。果实有助于种子的生产、保护和传播。通常,种子和果实在授粉和受精后发育。无融合生殖和单性结实分别是被子植物种子和果实产生的两种机制。无融合生殖是单性结实的一种类型。无融合生殖与单性结实的主要区别在于,无融合生殖是在不施肥的情况下产生种子,而单性结实是在不施肥的情况下产生果实。为了产生种子,雌配子体中的胚珠应该受精。否则,就会产生无籽的子实体。然而,单性结实可能导致营养繁殖。...
营养繁殖是一种主要存在于植物中的繁殖方式;这是植物利用种子或孢子以外的器官进行繁殖的过程。又称无性繁殖、营养繁殖或营养繁殖。植物营养繁殖分为自然繁殖和人工繁殖两种类型。自然和人工营养繁殖的主要区别在于,自然营养繁殖是在植物体内自然发生的,而人工营养繁殖是在人为干扰下发生的。通过根、鳞茎、球茎、块茎、吸盘、根茎、转轮、植株等进行自然营养繁殖;通过出芽、嫁接、分层、扦插、组织培养等进行人工营养繁殖。...
受精和萌发是植物有性生殖的两个过程。受精和萌发的主要区别在于受精是配子的融合,形成合子,而萌发是植物在适宜的条件下从种子或孢子中发育而成。开花植物授粉后受精。合子是受精后发育成胚胎的结果。种子植物的胚包含在种子中。在有利的条件下,种子吸收水分,根通过种皮生长。受精发生在产生配子的所有生物中,而萌发只发生在真菌和植物中。...
水分子通过细胞质膜进出细胞的机制称为渗透。渗透的两种类型是内渗和外渗。内渗是水进入细胞的过程。另一方面,外渗是水从细胞中流出。细胞质和周围溶液的张力决定了水运动的方向。张力是由两种溶液的水势定义的有效渗透压梯度。高渗、等渗和低渗是引起不同张力的三种溶液。肿胀和松弛是两种情况,发生取决于张力。肿胀和松弛的主要区别在于,当水被置于低渗溶液中时,肿胀是由于水通过内渗作用进入细胞,而当水被置于等渗溶液中时...
草本、灌木和乔木是根据每种植物的大小和分枝模式分类的三种植物。草本、灌木和乔木之间的主要区别在于,草本植物有柔软的、未木质化的、不分枝的茎,而灌木有木质的、立即分枝的、多枝的茎,乔木有木质的茎,在分枝前直立生长大约一米。由于灌木和树木有点相似,所以它们总是集中在一起。香蕉、罗勒、郁金香、生菜和香菜都是草药的例子。灌木比草本植物高。玫瑰和柠檬是灌木的例子。树是最高的植物。芒果、椰子和榕树就是树的例子...
基粒和基质是叶绿体的两种结构。叶绿体是光合作用发生反应的器官。基粒和基质的主要区别在于基粒是嵌入基质中的盘状板,而基质是叶绿体的均质、胶状基质。基粒通过晶间片层相互连接。它们含有不同的色素,如叶绿素a、叶绿素b、胡萝卜素和叶黄素。光合作用的光反应发生在基粒中。基质溶解光合作用、细胞组系统、叶绿体DNA和RNA所需的酶。光合作用的暗反应发生在基质中。...
表皮细胞和软木细胞是植物最外层的两种细胞。它们在不同阶段出现在裤子身体的不同部位。表皮细胞和木栓细胞的主要区别在于,表皮细胞在植物初生生长时覆盖整个植物体,而木栓细胞在植物次生生长后覆盖植物的茎和根。表皮细胞存在于植物的叶子和其他未成熟部分。它们以单层细胞的形式出现。软木细胞起源于软木形成层。...
软木和树皮是木本植物的两种外部成分。树皮由软木、软木形成层、黄皮层、皮层和次生韧皮部组成。软木和树皮的主要区别在于,软木是一种坚硬的、带有蜡的绝缘细胞层,可以保护茎和根不失水,而树皮是木本植物茎和根的最外层,具有贮藏、运输和保护功能。...
单子叶植物和双子叶植物的叶和茎中都有气孔。气孔的主要作用是促进气体交换。它们还促进蒸腾作用,有助于从土壤中吸收水分和通过木质部运输水分。气孔的大小由一对保卫细胞控制。单子叶植物气孔与双子叶植物气孔的主要区别是单子叶植物气孔保卫细胞呈哑铃形,双子叶植物气孔保卫细胞呈豆形。...
上表皮和下表皮是叶子的两个最外层,分别位于上表面和下表面。叶片是植物的主要结构,通过光合作用生产食物。叶子的细胞由叶绿素等光合色素组成,以吸收阳光中的能量。无机分子利用这种能量产生简单的碳水化合物。因为叶子是光合作用的中心,所以叶子的解剖结构是以这样一种方式构建的,以促进光合作用。上下表皮的结构有助于光合作用的进行。此外,这两种表皮都有助于维持植物的水分平衡。上表皮与下表皮的主要区别在于上表皮具有...
原丝体和原叶体是原始植物的两种结构。原丝体与原叶体的主要区别在于原丝体是苔藓和苔类植物发育的第一阶段,原叶体是蕨类植物的配子体。原丝体是一条线状的细胞链,而原叶体是一个心形结构。原丝体和原叶体都是由孢子萌发产生的。两种结构都不分化为茎、根和叶。原丝体是苔藓和苔类植物配子体发生的第一阶段。原叶体由雄性和雌性性器官组成,分别产生雄性和雌性配子。...