几年前，我们建议在你的冰箱里放一个坏掉的硬盘，以便在硬盘完全坏掉之前恢复数据。开发人员站点服务器区域突出显示了相同的提示，以及有关保存冷冻驱动器的更详细说明。

1. Remove the hard drive from the computer.
2. Place the hard drive inside of a zip top freezer bag. (don't buy a cheap bag.)
3. Place the wrapped hard drive inside of ANOTHER zip top freezer bag. (yes, you need to do this)
4. Place the double wrapped hard drive in the coldest part of your freezer.
5. Leave the hard drive in the freezer for 12 hours at least. You want it good and cold! (see figure 2 below)
6. Once very chilled, install the hard drive in your computer and start pulling off data. Begin with the most valuable data.
7. At some point, the hard drive will fail again. When it does, mark the last successfully copied data, pull out the hard drive, double wrap it again and stick it in the Chill Chest for another 12 hours.
8. You may need to do this a number of times to get all the data you want, or until the hard drive stops working completely.

硬盘驱动器的工作方式有点像旧的记录，除了不是一个记录和针，硬盘驱动器有几个旋转非常快的读/写磁头访问的小盘片。在理论上，我相信，这将工作与硬盘驱动器轻微扭曲盘片；解冻后，你的硬盘被损坏了，结果是磁头被磨碎了。通过冻结硬盘，你有希望缩小足够的盘片，他们不再摩擦头暂时，至少。更新：读者bobeltomate提供了一个更好的理论。请记住，这并不总是一个确定的事情，但如果你是绝望的，这是值得一试。

你比我更清楚这是为什么吗？以前试过成功吗？让我们在评论里听听。

硬盘出现故障时要做什么[服务器区域]