当你打开电脑的时候，几乎没有什么东西能比得上你的沉沦感，因为硬件问题，电脑很快就会死掉。考虑到这个问题，今天的超级用户问答帖子回答了一个压力很大的读者问题。

今天的问答环节是由SuperUser提供的，SuperUser是Stack Exchange的一个分支，是一个由社区驱动的问答网站分组。

问题

超级用户读者Baris Usakli想知道短路是否会损坏硬盘：

Everything was working fine until one day when my computer would shut down a split second after the power button was pressed. All the fans would start spinning and the lights would come on, but then everything would go dark half a second later. After this happened, pressing the power button had no effect. The only way to get my computer started again was to unplug the power cord, then plug it back in.

I suspected the power supply was the cause at first, so I bought another one, but I still faced the same issue. I unplugged everything and reseated the RAM/GPU and drives. After doing that, my computer booted and I thought I was good to go, but then I noticed my secondary hard disk drive was no longer working.

It was not visible in BIOS or Windows. I replaced the hard disk drive with another one, but after a while, the original issue came back. So I reseated everything again and was able to boot back up, but to my horror, the new hard disk drive was dead as well. At this point, I thought maybe something was shorting the system out, so I took everything out of the case including the motherboard. To my surprise, there was a loose screw stuck between the back of the motherboard and the case.

I removed the screw, put everything back together, and now the power down issue no longer occurs, but I am not 100 percent sure that the system is stable. Is it possible that a screw causing a short circuit can damage hard disk drives? My operating system’s drive is an SSD and it is running fine. The ones that “died” are regular 1 TB hard disk drives.

短路会损坏硬盘吗？

答案

超级用户贡献者davidschwartz、eckes和gronostaj为我们提供了答案。首先，大卫·施瓦茨：

Yes, it is definitely possible. For example, the screw could short out the +5V line to the +12V line and fry the hard disk drive’s onboard controller.

接着是埃克斯的回答：

Yes, it can. A hard disk drive can fail indirectly. Hard disk drives that have been used for a long time tend to fail at the next reboot/startup (caused by a short circuit or normal power switch). Other possibilities are a surge from a wall socket or induction after a short circuit reached the hard disk drive’s electronics or controller. Note that there should be all kinds of fuses, diodes, capacitors, and shielding in place so that an electrical problem does not spread, but cheap hardware tends to be commonplace.

There is also the problem of (logically) corrupt sectors if the power fails while writing. This should also be covered by the hard disk drive, spinning just long enough to finish writing the data, but it may not succeed though. Such corruption might result in transient read errors, and it might require some disk repair work or special tools to refresh the sector(s) in question.

It is typically hard to know the exact reason, but a screw connecting the main board’s power lines with a grounded chassis (or with each other) does sound like a probable cause for a short circuit, which could cause damage to the hard disk drive (which it should not do).

I do want to add that your computer’s “symptoms” could also mean that the hard disk drive died, then short circuited the computer, or that the power supply unit was overloaded with the hard disk drive’s demand for power at startup.

gronostaj最后的回答是：

Yes! I have lost two hard disk drives due to a short circuit. It was quite spectacular. An integrated circuit at the bottom of one exploded, resulting in a loud bang, a little fireball, and a nice crater.

有什么要补充的解释吗？在评论中发出声音。想从其他精通技术的Stack Exchange用户那里了解更多答案吗？在这里查看完整的讨论主题。

图片来源：gronostaj（超级用户）