当你在办公室建立网络，并根据使用的设备和设置，网络究竟能有多智能和/或高效？今天的超级用户问答帖子回答了一位好奇的读者的问题。

今天的问答环节是由SuperUser提供的，SuperUser是Stack Exchange的一个分支，是一个由社区驱动的问答网站分组。

照片由felixtriller（Flickr）提供。

问题

超级用户读者bizzehdee想知道他的办公室网络到底有多聪明和/或高效：

There is an argument within my office about how **art/efficient the network we have set up really is. We have a fiber line and a cable line running into a load balancing router, which has a hardware firewall and a 64 port switch connected to it. Each of our workstati*** are connected to the switch (about 30 machines) plus an NAS and a couple of internal test servers (all assigned 192.168.0.x addresses).

If workstation A wants to communicate with workstation B, is our network **art enough to go:

A → Switch → B and only travel via the first most common connection, or would the path be A → Switch → Firewall → Router → Firewall → Switch → B and have to use that full route every time?

他们的办公网络到底有多聪明和/或高效？

答案

超级用户贡献者Ben N和Nathan Adams为我们提供了答案。首先，Ben N：

Routers are not necessary unless your traffic needs to move to a different subnet. When a computer wants to send some IP traffic to a different machine on its subnet, it needs the recipient’s MAC address, since IP addresses are not a thing at the switch level/layer (Layer 2 of the OSI model).

If it does not know the MAC address, it broadcasts an ARP request saying, “Hey, whoever has this IP address, could you tell me your MAC address please?” When the machine gets a resp***e, that address is then attached to the packet, and the switch uses it to send the packet out via the correct physical port.

When the destination is not on the same subnet, routers need to be involved. The sender gives the packet to the appropriate router (usually the default gateway unless you have special routing needs), which sends it through the network to the intended recipient.

Unlike switches, routers know about and have IP addresses, but they also have MAC addresses and that is the MAC address that initially gets put on packets that need routing (MAC addresses never leave the subnet).

You can see router IP addresses in the gateway column of the output of route print on Windows. Destinati*** that do not require routing have On-link there.

接着是内森·亚当斯的回答：

If two computers are connected to the same VLAN on a switch and share the same subnet mask, the switch should deliver the packet without hitting your firewall or router.

You can verify this by running tracert 192.168.0.X (assuming you are using Windows) and you should see a direct route to that system.

有什么要补充的解释吗？在评论中发出声音。想从其他精通技术的Stack Exchange用户那里了解更多答案吗？在这里查看完整的讨论主题。